How to Change Wireless Channels on the AmpliVox 96 Channel Receiver

With the proliferation of wireless communications there is also an increasing chance for channel interference.

That’s why the AmpliVox 96 Channel receiver will help you ensure interference free wireless communication.

Here’s How to Change Channels using this 96 Channel Wireless Receiver

First find the wireless receiver on your unit and turn it on.

It will show the last wireless channel used.

You’ll be using either a handheld with it’s own built-in transmitter or a microphone with a belt pack transmitter.

Let’s first look at the handheld microphone.

Sync channels with the handheld microphone:

1. Turn on the handheld microphone using the switch at the base
2. To automatically sync the microphone to the same channel as the receiver, hold the microphone near the receiver and push the sync button on the receiver
3. Then push the set button on the microphone
4. After a few seconds, the channels will align

Should you want to manually change channels:

1. You can use the up or down arrow buttons on the receiver
2. Then hit the set button on the microphone
3. Select the same channel you selected on the receiver
4. Then hit the set button again to lock it in place

To sync channels using a microphone with a beltpack transmitter:

Sync channels with beltpack transmitter:

1. First turn on the transmitter
2. Then push the sync button on the receiver
3. Followed by the set button on the beltpack transmitter
4. The channels will automatically sync

For Manual Channel Switching:

1. First toggle to a new channel on the receiver using the up or down arrow buttons
2. Then push the set button on the beltpack transmitter matching the channel on the receiver
3. Then push the set button again to lock the channel in place

AmpliVox helps you enjoy interference free wireless communication.